杜笙（Tulsion）A-23純水混床陰離子樹脂
純水混床陰離子樹脂Tulsion A-23 ISO-9001/ISO-14001/OHSAS-18000
強堿型 , 均粒陰離子交換樹脂適用于超純水系統的混床用離子交換樹脂。Tulsion A-23強堿型離子交換樹脂 ,是一款苯乙稀系列具有四級氨的高品貭 Type-1陰性離子交換樹脂。并同時擁有{jj1}的物理及化學穩定品質。可應用于汽電共sf電廠冷凝水處理及超純水系統中的混床, 去除水中的陰性離子 。TulsionA-23 其均勻的顆粒直徑, 能取代傳統的離子交換樹脂而得到更好的處理水質及減少壓力損, 可以和Tulsion T-42 一起搭配使用于2B3T及超純水系統的混床 。
典型特性（TYPICAL CHARACTERISTICS）： Tulsion A-23
主體結構/Matrix structure 聚苯乙烯共聚物/Polystyrene copolymer
型式(Type) Strong Base Anion Exchange Resin
物理型式/Physical form 濕潤球狀/Moist spherical beads
官能團/Functional group 季胺I型/Quaternary ammonium Type-I
均勻系數(Uniformity coefficient) Max. 1.25
平均粒徑(Harmonic Mean size) 580 + 50 um
全交換容量(Total Exchange Capacity) 1.30 meq/ ml
離子型式(Ionic form) Chloride
濕度/Moisture content 40 - 48%
反洗穩定密度/Backwash settled density 670 - 710 gm/lit(42 - 44 lbs/cft)
{zd0}溫度/Maximum Thermal Stability 60℃（140℉）
PH范圍/PH range 0 - 14
微粒含量(Fines Content) Less than 0.5% through 50 U.S. mesh
溶解率(Solubility) Insoluble in all common solvents
操作條件（OPERATION CONDITIONS）： Tulsion A-23
操作溫度 (Operation Temp.) max C 60
樹脂床高度 (Resin Bed Depth) mm 800
采水流量 (Service Flow Rate) maxi 60 m3/hr/m3
逆洗流量(Backwash Flow Rate) 5 to 10 m3/hr/m3
逆洗空間(Backwash Expansion) 50 to 70 %
再生藥劑 (Regenerant) NaOH
再生藥劑用量(Regeneration levels) 40 to 160 gms NaOH / Liter
再生藥劑加藥時間(Regeneration contact min.) 30 – 60 mins
再生流量 (Regeneration flow rate) 5 to 10 m3/hr/m3
再生慢洗 (Regeneration slow rinse) 2 BV mini.
快洗 (Fast Rinse) 采水流量Service Flow Rage
快洗 水量 (Fast Rinse Volume) 4 to 6 BV
測試（TESTING）： Tulsion A-23 離子交換樹脂的抽樣和測試是按標準的測試程序，即ASTMD - 2187和IS - 7330，1998.包裝（PACKING）： Tulsion A-23 Super Sack 1000 lit Super Sack 35 cftMS drums 180 lit. MS drums 7 cft
HDPE lines Bags 25 lit. HDPE lines Bags 1 cft
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact:17090831380，,13917047856，QQ315684815.
