冠盈科技專業機器人視覺系統集成服務供應商，致力于為客戶提供一體化高智能型作業模式自動化配套設備?？稍谏a(chǎn)過程中對產品質量進行自動檢測和處理，從而減少工廠企業無形的時間成本和有形的物料成本的浪費。主要應用領域：
1.通過2D視覺的劃痕檢測功能，自動識別并挑出表面有劃痕的不合格產品來提高出廠合格率
2.裝配檢測，檢測是否所有的部件都安裝到位（綠色合格，紅色不合格）
3.包裝檢測，食品包裝行業通常需要對包裝進行檢測，包括產品外包裝的缺陷及瑕疵的鑒別
4.標簽檢測，檢測產品標簽是否存在
5.方向檢測，檢測物品的方向狀態是否正確，對產品的方向性實現左右，前后，上下的全方位監控
6.細節檢測，對五金塑膠鑄件的組裝的部件有無，缺失小程度的破損也可以被檢測出
7.打孔檢測，檢測打孔是否完成，同時檢測孔徑尺寸是否接近正確值
8.螺紋、螺栓、螺母檢測檢測螺紋、螺栓、螺母是否存在
9.長度檢測，檢測產品的長度是否在允許的誤差范圍內。
Guanying technology professional robot vision system integration service provider, is committed to providing customers with high integration intelligent automation equipment operation mode. Can automatically detect and process on the product quality in the production process, thereby reducing the cost and the time of factories and enterprises intangible tangible material waste. The main field of application:
1 through the scratch detection function of 2D vision, automatic recognition and pick out the surface scratches the unqualified products to improve the passing rate of the factory
2 assembly and testing, testing whether all components are installed in place (red green qualified, unqualified)
3 packaging, food packaging industry is usually necessary to detect defects and defect identification including packaging, product packaging.
4 label detection, detection of the existence of the label
5 direction detection, detection of articles in the direction of state is correct, and the product direction, left or right, all-round monitoring of up and down
6 details of detection, assembly of metal and plastic parts of the casting is missing, damaged the small extent can also be detected by
The 7 hole detection, detection of drilling is completed, the simultaneous detection of aperture size is close to the correct value
8 screw, bolt, nut, bolt, nut thread detecting whether there
9 length detection, detection of the length of the product is in the allowable error range.
